It is normally a 24 hour application processAccordion Sample Description
After curing overnight, you may drive your vehicle
ValuGard products can take up to one week to fully cure. Avoid car washes or pressure washing the vehicle underbody for one week
Undercoat is not applied to anything that spins (drive shaft), has moving parts (brakes) or gets hot (exhaust system
Certain vehicle frames have an undercoating applied to it during assembly. That frame coating is warranted under the manufactures 3yr/60K new vehicle limited warranty.
Yes, we remove and coat on the backside. In rare cases, the spare tire may be rusted in and we cannot remove
First, we pressure wash the underbody. Second, wire brush to remove remaining corrosion. Third, we apply ValuGard Rust Converter – process encapsulates existing rust and creates a quality surface for undercoat to bond. After the converter sets up, we topcoat with ValuGard undercoat. This process takes about 3 hours
Your vehicle had evidence of corrosion/rust on the underbody. Used vehicles with rust or corrosion present do not qualify for any ValuGard warranty
For any warranted vehicle, we need the customer name and address to complete the warranty registration
We do our best to mask off certain areas prone to have over spray. In some cases, even after we do our walk around, we may miss some spots. We would be happy to take care of this for you or you can remove with a rag dampened in mineral spirits. Mild mineral spirits are safe on paint. Do not use a hot solvent like MEK or acetone
No, ValuGard coatings never require inspection. If you see rust, bring it to the selling dealer’s attention or call ValuGard direct at 1-877-825-8421. To report a claim, ask for the warranty manager